暫無繁體中文內容——顯示English。
Sintered stone is the third generation of large-format surfaces — the step beyond ceramic (Gen 1) and porcelain (Gen 2). It is made entirely from natural minerals such as quartz, feldspar and clay, ground to a fine powder, compacted under enormous pressure and fired above 1,200°C. The process fuses the particles into one dense slab, recreating in hours the heat-and-pressure that forms natural stone over thousands of years — unlike engineered stones such as quartz, which are held together with chemical resin binders.
How it is different
Because the pattern runs through the entire body of the slab and there is virtually no porosity, sintered stone resists heat, scratches, stains and UV fading far better than natural marble or standard porcelain. It never needs sealing, it will not etch from acids like lemon or wine, and the surface is hygienic and food-safe.
Big is beautiful
Each Big Slab panel measures 160 × 320 cm at just 12 mm thick — one continuous piece covering 5.12 m². Fewer joints mean a calmer, more seamless surface, whether it wraps a kitchen island, clads a feature wall or runs across a floor.
Where to use it
Countertops, islands and bars; feature walls, backsplashes and facades; and floors in high-traffic spaces — indoors and out. The same slab works everywhere.
Sintered stone vs other materials
| Material | What it is | Strengths | Weaknesses |
|---|---|---|---|
| Sintered Stone (Big Slab) | Natural minerals fused under heat and pressure into one full-body slab. | Heat-, scratch-, stain- and UV-resistant; non-porous and food-safe; needs no sealing; available in large format. | Higher upfront cost; requires skilled cutting and installation. |
| Marble | Natural metamorphic stone. | Prestige look, unique veining, naturally cool to the touch. | Porous — stains and etches from acids; needs regular sealing; scratches. |
| Granite | Natural igneous stone. | Very hard and heat-resistant. | Porous (needs sealing); limited patterns; edges can chip. |
| Quartz (engineered) | About 90% ground quartz bonded with resin. | Consistent colour, non-porous. | The resin binder is not heat- or UV-proof — it can scorch or yellow; not suited to outdoors. |
| Solid Surface | Acrylic/polyester resin with mineral fillers. | Seamless joints, repairable. | Soft and scratches easily; low heat resistance; can look plasticky. |
| Stone Veneer | A thin layer of stone or composite on a backing board. | Lightweight and low cost. | Thin and fragile; limited durability; not suited to worktops. |
| Artificial / cultured marble | Marble dust bound with polyester resin. | Inexpensive and easily moulded. | Low durability; scratches and dulls over time; not heat-resistant. |
Want to see it in person? Visit the Big Slab showroom in Chatuchak, Bangkok, or talk to our team on LINE — we help with design, cutting, fabrication, delivery and installation, all in one place.